I. Features
- Utilizes compressed air to generate large impact force, suitable for multiple applications such as printing, blanking, stamping, and assembly.
- Simple structure, low air consumption, and large impact force.
II. Model
① Cylinder Model
② Mounting Type (See Next Page)
③ Cylinder Bore (See Below Table)
④ Stroke (See Below Table)
III. Main Technical Parameters of Cylinder
| Cylinder Bore(mm) | Φ63 | Φ80 | Φ100 | Φ125 |
| Working Pressure(bar) | 2~8 |
| Working Medium | Dried compressed air with oilmist,filtered to remove water |
| Medium and Ambient Temperature(℃) | -5~+60 |
| Stroke S(mm) | 125 | 160 | 200 | 250 |
| Maximum Impact Work at P=6bar(≥N ·m) | 31.6 | 69 | 143 | 294 |
| Stroke Corresponding to Maximum Impact Work(mm) | 60 | 80 | 110 | 132 |
| Impact Frequency at P=6bar (times/min) | 60 | 50 | 40 | 30 |
Note: The maximum impact work is at 0.55 S of the stroke in the table.
IV. Graphic Symbols and Mounting Types
SD (Basic Type)
J (Axial Foot Mount Type)
F (Rear Flange Type)
FQ (Front Flange Type)
