Ningbo Sanmin Import And Export Co.,Ltd.
Ningbo Sanmin Import And Export Co.,Ltd.
Add to Cart
Overview
The TL5123 pressure switch (high pressure)/pressure controller adopts a combination of piston and diaphragm sensors, which can be used for compressed air containing oil mist and other non corrosive oil mist gases and hydraulic oils, water oil emulsions, and medium liquid media with good lubrication performance.
The setting value of TL5123 pressure switch (high pressure)/pressure controller is adjustable, with an adjustment range of 0.3~40MPa.
Main Technical Performance
| Common | Explosion proof type | |
|---|---|---|
| Working viscosity | <1×10－3m2/s | <1×10－3m2/s |
| Switching element | microswitch | Sealed switch |
| Explosion proof grade | - | Exde Ⅱ CT4～T6 Certificate Number: GYB24.1453X |
| Degrees of protection provided by enclosure | Sealed ring with groove IP54, O-ring IP65(Compliant with DIN40050, equivalent to IP65 in GB4208) | Sealed ring with groove IP54, O-ring IP65 (compliant with DIN40050, equivalent to IP65 in GB4208) |
| Ambient temperature | －20℃～40℃ | －20℃～40℃ |
| Medium temperature | 0℃～100℃ | 0℃～120℃ |
| Installation position | The pressure interface is vertically downward (allowing for a tilt of 15 °) | The pressure interface is vertically downward (allowing for a tilt of 15 °) |
| Anti-Vibration Performance | Max:40 m/s2 | Max:20 m/s2 |
| Repeatability error | ≤2.5% | ≤2.5% |
| Contact capacity | AC 220V 6A(Resistive) | DC 250V 0.25A (Resistive) 60Wmax AC 220V 6A(Resistive) 1250VAmax |
Specifications
TL5123 switching error is not adjustable
| Setting value adjustment range (MPa) | Switching difference not exceeding (MPa) | **Allowable pressure ① (MPa) | Switching frequency/minute | Pressure sensor material | Interface thread ② | Weight (kg) | Outline dimension drawing number | Order catalog number | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Casing | Diaphragm | Piston | Common | Explosion proof type | |||||||
| 0.3～4 | 0.9 | 30 | 20 | brass | VITON | steel | M20*1.5 | 0.8 | 01 | TL5123.10-191051 | TL5123.50-191051 |
| 0.5～6.3 | 1.3 | 30 | 20 | brass | VITON | steel | M20*1.5 | 0.8 | 01 | TL5123.10-200051 | TL5123.50-200051 |
| 0.5～10 | 1.6 | 30 | 20 | brass | VITON | steel | M20*1.5 | 0.8 | 01 | TL5123.10-202051 | TL5123.50-202051 |
| 0.5～16 | 1.9 | 30 | 20 | brass | VITON | steel | M20*1.5 | 0.8 | 01 | TL5123.10-203051 | TL5123.50-203051 |
| 1～25 | 2.5 | 30 | 30 | brass | VITON | steel | M20*1.5 | 0.8 | 02 | TL5123.10-215051 | TL5123.50-215051 |
| 1～40 | 2.8 | 60 | 30 | brass | VITON | steel | M20*1.5 | 0.8 | 02 | TL5123.10-216051 | TL5123.50-216051 |
TL5123 switch difference adjustable
| Setting value adjustment range (MPa) | Switching difference not exceeding (MPa) | **Allowable pressure ① (MPa) | Switching frequency/minute | Pressure sensor material | Interface thread ② | Weight (kg) | Outline dimension drawing number | Order catalog number | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Casing | Diaphragm | Piston | |||||||||
| 0.3～4 | 1.3 | 30 | 20 | brass | VITON | steel | M20*1.5 | 0.85 | 01 | TL5123.00-191051 | TL5123.40-191051 |
| 0.5～6.3 | 1.6 | 30 | 20 | brass | VITON | steel | M20*1.5 | 0.85 | 01 | TL5123.00-200051 | TL5123.40-200051 |
| 0.5～10 | 1.6 | 30 | 20 | brass | VITON | steel | M20*1.5 | 0.85 | 01 | TL5123.00-202051 | TL5123.40-202051 |
| 0.5～16 | 2.2 | 30 | 20 | brass | VITON | steel | M20*1.5 | 0.85 | 01 | TL5123.00-203051 | TL5123.40-203051 |
| 1～25 | 2.8 | 30 | 30 | brass | VITON | steel | M20*1.5 | 0.85 | 02 | TL5123.00-215051 | TL5123.40-215051 |
| 1～40 | 4 | 60 | 30 | brass | VITON | steel | M20*1.5 | 0.85 | 02 | TL5123.00-216051 | TL5123.40-216051 |
Note: In practical work, even brief pressure peaks are not allowed to exceed this value.
② If there are special requirements at the interface, please indicate them in the order.
01
02
03
04