Ningbo Sanmin Import And Export Co.,Ltd.
Ningbo Sanmin Import And Export Co.,Ltd.
Add to Cart
NBSANMINSE SDR 1Mpa Oil Pump AC 380 Volt 50 Hz 0.25 0.5 L / Min Rated Flow Lubrication Pump for CNC machine
Performance and characteristics
. The rated working pressure : equipped with overflow valve, prevent oil pump overload
. Without unloading function : oil pump stop working without unloading function, mainly used in the resistance type thin oil lubrication system
. Equipped with liquid level switch (closed lack of oil 10W/DC100V/0.5A), lack of oil tank signal output
. Pump with pressure switch (normally) open AC220V/2A DC36V/2A), to monitor the lubrication system is the main oil line block and the pressure loss (optional parts)
. Pump can match the PC-2 display controller, control the operation run and rest time (optional parts)
. Transparent resin oil tank
. Use the lubricant viscosity 32~2500cSt.
. Supporting distributor : SDPC Type metering, SDB Type distributor
Attention
. Pressure switch as much as possible installed at the end of the system main pipe, not within the oil pump, it can more correctly detected the lubrication system condition with main pipe blocks the flow and pressure loss
. If the host with PLC, should by the host PLC control oil pump run tie and rest tie, the oil pump without set controller; But if the host does not PLC or with PLC wiring is not convenient, the oil pump shall set the controller, the controller to the countdown control lubrication pump working cycle : run time and rest time.
. If the working power supply is not AC380V 50Hz, should indicate the power and HZ when order power supply
. The following for is not configured pressure switch and controller of the SDR series pump as an example illustrates the specific technical parameters, configuration has a pressure switch or the pump parameters is the same with the specification of the controller
. Example : the rated flow 0.5L/min, oil capacity 3.0L, Rated pressure 1.0MPa, the working power supply is AC380V50Hz, without pressure switch and controller of SDR series thin oil pump models for SDR5-31; lubrication pump with a pressure switch (optional), type of SDR5-31P; lubrication pump with a controller (optional), type of SDR5-31C; If the work is specific power requirement, when you order it should indicate the voltage and frequency, such as SDR5-31/400V60Hz.
| Project | Rated pressure (Mpa) | Rated flow (L/min) | Oil tank capacity (L) | Electric machine parameter | Code Type | |||
| Voltage (V) | Frequency (Hz) | Power (W) | Revolving speed (r/min) | |||||
| Model | ||||||||
| SDR2.5-31 | 1 | 0.25 | 3 | AC380 | 50 | 60 | 1350 | 1.With pressure switch model after P, Like SDR2.5-31P. 2.With controller model after C, Like SDR 2.5-31C. 3.Indicate the power, Like SDR2.5-31Z/AC400V60Hz. |
| SDR5-31 | 0.50 | 90 | 2700 | |||||
| SDR2.5-41 | 0.25 | 4 | 60 | 1350 | ||||
| SDR5-41 | 0.50 | 90 | 2700 | |||||
| SDR2.5-61 | 0.25 | 6 | 60 | 1350 | ||||
| SDR5-61 | 0.50 | 90 | 2700 | |||||
| SDR2.5-91 | 0.25 | 9 | 60 | 1350 | ||||
| SDR5-91 | 0.50 | 90 | 2700 | |||||
